Studer OnAir 1500, Operating Instructions Manual

Page: 114 / 386

OnAir 1500 Digital Mixing Console
5-58 Operation
Document generated: 06.08.14 SW V6.0
5.11.4 Error Messages
5.11.4.1 System
Error Code Error Type Error Text / Comment
1000 Error
SYSTEM, Fatal software error occurred - System will be stopped. For details see log-file.
Appears if a SoftError occurred. Container closes automatically.
1001 Warning
SYSTEM, Extension ‚TalkBack.ext‘ could not be started. Reason: ’File ’xml\TalkBack.xml‘ not found’.
Appears during power-up under the following conditions:
- the extension could not find the appropriate xml-file
- the extension could not find the appropriate xdr-file
- a parser error occurs during parsing the appropriate xml-file
The affected extension will probably not work correctly.
1005
Warning
SYSTEM, Extension ‘User.ext’ default settings assumed. Reason: ‚Did not find XML-File or XDR-File: xml\
User.xml‘.
Default settings are:
- 20 Users
- 8 Policies
- 8 Departments
1100 Error
SYSTEM, ‚Desk‘ communication failure: Connection to ‚System40:Core‘ lost.
The error appears if a container loses the network connection to another container under the following
conditions:
- the remote container is in the same system
- the container depends on the remote container (proxy objects exist)
- the container itself is not a CORE (from the user point of view, a CORE does not depend on any other
container, even if there exist proxy objects)
1201 Warning
SYSTEM, Low Memory on ‚System40:Core‘.
Physical Memory available: 4.802 MB
Appears during power-up or runtime when the physical memory falls below either 5MB for all OnAir con-
tainers or 20MB for the Route6000 core.
1202 Warning
SYSTEM, Not enough physical memory on ‘System40:Core’ host card. Memory upgrade required.
Appears during start-up of a container, if the host system is not equipped with the specified amount of
physical memory.
- OnAir3000 with V3.2 and higher, the CORE must be equipped with 512MB DRAM and the DESK with
256MB.
- Route6000 must be equipped with 512MB
- Route6000 with 2.2.11 or higher must be equipped with 1GB
1401 Warning
SYSTEM, Initial Snapshot cannot be loaded. Incompatible snapshot file version ‘myFirstSnap’.
Appears if an initial Snapshot file cannot be loaded because of the wrong snapshot version.
1402 Warning
SYSTEM, Initial Snapshot file ‘myFirstSnap’ is corrupted!
Appears if an initial snapshot file cannot be loaded because of CRC check failure.
1403 Warning
SYSTEM, Initial Snapshot files cannot be created. Not enough memory on the ‘CORE’ file system!
Appears if there is not enough memory to manually or automatically save an initial snapshot on the CF card
of the specified container.
1404 Warning
SYSTEM, Initial Snapshot file ‚c10_initial.iss‘ cannot be created on the ‚CORE‘. Error code 3.
Appears if an error code is returned during write operation while manually or automatically saving an initial
snapshot on the CF card of the specified container.
1405 Warning
SYSTEM, Initial Snapshot file ‚c10_initial.iss ‚ cannot be created on the ‚CORE ‚. The folder ‹snapshots›
does not exist.
Appears if the snapshot folder does not exist while manually or automatically saving an initial snapshot on
the CF card of the specified container.
1409 Warning
SYSTEM, Initial Snapshot cannot be loaded. Incompatible product identification in snapshot ‘myFirstSnap’.
Appears during loading of the initial snapshot in case of incompatible product identification.
1410 Warning
SYSTEM, The initial Snapshot folder ‘path’ does not exist. Initial Snapshots could not be loaded nor cre-
ated.
Appears during start-up if the folder does not exist.