Studer OnAir 1500, Operating Instructions Manual

Page: 205 / 386

OnAir 1500 Digital Mixing Console
Operation 5-149
Document generated: 06.08.14 SW V6.0
# containerid = 160 : CHANNEL Screen of the Secondary Desk for Channels 1..6
# containerid = 161 : CHANNEL Screen of the Secondary Desk for Channels 7..12
# containerid = 162 : CHANNEL Screen of the Secondary Desk for Channels 13..18
# containerid = 163 : CHANNEL Screen of the Secondary Desk for Channels 19..24
# containerid = 164 : CHANNEL Screen of the Secondary Desk for Channels 25..30
# containerid = 165 : CHANNEL Screen of the Secondary Desk for Channels 31..36
# containerid = 166 : CHANNEL Screen of the Secondary Desk for Channels 37..42
# containerid = 167 : CHANNEL Screen of the Secondary Desk for Channels 43..48
# containerid = 168 : CHANNEL Screen of the Secondary Desk for Channels 49..54 (virtual
# Strip Channels)
# containerid = 169 : CHANNEL Screen of the Secondary Desk for Channels 55..60 (virtual
# Strip Channels)
# containerid = 240 : DNet TestFramework
# containerid = 254 : SNMPAgent
containerid = 150
# The containername identifies this container in a readable way
# and must be unique within the mixing console system. It is recommended
# not to use more than 8 characters due to visualization aspects.
# “Undefined” is not allowed!
containername = “RemtCons”
# Multicast
# ---------
# If you use IGMP multicasts instead of broadcasts in your network,
# you have to uncomment the lines below. It is possible that a
# container is member of one or more than one multicast groups.
#
# NOTE: For an optimal performance, make sure that all network ressources
# (Switches, Routers...) support IGMP.
#
# NOTE: To avoid IP conflicts, check the available addresses for
# multicast groups (www.iana.org). Use preferable addresses from the
# local scope (239.255.0.0/16) described in RFC 2365.
#
# NOTE: If the multicast should reach computers beyond the local subnet
# Set MulticastTimeToLive > 1 (1 is default)
MulticastGroup = 239.255.0.1
MulticastGroup = 239.255.0.2
MulticastGroup = 239.255.0.3
MulticastTimeToLive = 10
# Multiple Network Adapters
# -------------------------
# When more than one network adapter is enabled on the computer, the MAC Address has to be
# specified
#
MAC = 00-1B-21-4F-13-BD
# Demo Version
# -------------------------
# Enable this parameter if you want to enable the OnAir 3000 Demo Version. The OnAir Demo
# Version has all software options (I\O Sharing, CMS...) enabled, but no network connection and
# the DSP extension will not be loaded.
# Don’t use this parameter on Windows CE!
#
# DemoVersion
##########################################################################