Figure 6–6 Rear Air Separation Panel Installation (Empty shelf position directly below CDU A)
REAR VERTICAL
CABINET RAIL
CDU MOUNTING
SCREW
(4 PLACES)
CXO-3935A-MC
AIR
SEPARATION
PANEL
UPPER-MOST
SHELF
U-NUT, 10-32
(4 PLACES)
6.6 Reinstalling Exterior Cabinet Panels
Once the cabinet rack space is configured as desired, the exterior cabinet panels
may be reinstalled. Refer to Figure 6–1 and reinstall the exterior cabinet panels
as follows:
1. Position a side panel against the cabinet with the lip above the upper hanger
clips just over the upper edge of the side of the cabinet.
2. Ensure that the entire surface of the side panel rests firmly against the side
of the cabinet.
3. Allow the panel to slide downward, catching the two hanger clips as it moves.
4. Install the side panel bolts into the side panel through the holes in the top
side rails of the cabinet.
5. Repeat steps 1 through 4 to install the other side panel.
6. Locate the four inset nylon snap fasteners on the top cabinet rails.
WARNING
The top cover is heavy and awkward to lift. Installing it is a two-
person task. Failure to use sufficient personnel may result in injury or
equipment damage.
7. Position the top cover over the cabinet. Position the cover as shown in
Figure 6–1 such that the front end of the panel with the shorter overhang is
oriented toward the rear of the cabinet.
Installing StorageWorks Shelves 6–9
