8. Using Table 6–1, determine the correct stop bracket position for the shelf type
being installed.
Table 6–1 Shelf Stop Bracket Positions
StorageWorks Shelf Type
Front Shelf Stop Bracket
Position
Rear Shelf Stop Bracket
Position
SHDZZ–ZZ
4
1
9. Insert the tab on the stop bracket into the slot at the correct stop position on
the shelf bracket. Fasten the stop bracket to the shelf bracket, as shown.
10. Repeat steps 2 through 9 to mount the companion shelf bracket on the
opposite cabinet rail. To ensure proper alignment of the brackets, use care to
mount the bracket to the correct rail mounting holes.
11. With the power supply end of the shelf to the left and the blowers facing
the cabinet, slide the shelf into the shelf brackets until it contacts the inner
stop brackets. The shelf should slide smoothly into the brackets. If it binds,
remove it and check the alignment of the shelf brackets. The shelf bracket
mounting screws may need to be loosened slightly to allow the brackets
to align with the shelf. Retighten the screws when the shelf brackets are
properly aligned.
12. Using Table 6–2, verify that you have the correct locking bracket part number
for the shelf type and position (front or rear) being installed.
Table 6–2 Shelf Locking Bracket Part Numbers
StorageWorks Shelf Type
Front Shelf Locking Bracket
Part No.
Rear Shelf Locking
Bracket Part No.
SHDZZ–ZZ
74–46441–01
74–46439–01
13. Once the shelf is positioned within the shelf brackets, install the shelf’s
locking brackets to both shelf brackets with screws, as shown. Push the
locking bracket against the shelf to seat it before tightening the screws.
6–4 Installing StorageWorks Shelves