4.1.1 Shelf Locations
Figure 4–1 shows the proper cabinet rail mounting holes for each shelf location
when TZLX-series tape drives are not installed. Shelf mounting hole numbers
are counted from the top of each rail. The hole number assignments shown in
the figure identify the mounting holes for each shelf’s
top
bracket screw. See
Chapter 6 for detailed procedures pertaining to the mounting of StorageWorks
shelves.
Figure 4–1 SH043 Storage-only Cabinet Shelf Locations
CXO-3900A-MC
MOUNTING
LOCATIONS
MOUNTING
LOCATIONS
STORAGE
POSITION S9
STORAGE
POSITION S8
STORAGE
POSITION S7
STORAGE
POSITION S6
CABINET FRONT
CABINET REAR
HOLE
#20
HOLE
#26
HOLE
#32
HOLE
#14
HOLE
#10
STORAGE
POSITION S10
STORAGE
POSITION S5
STORAGE
POSITION S4
STORAGE
POSITION S1
STORAGE
POSITION S2
STORAGE
POSITION S3
HOLE
#2
HOLE
#20
HOLE
#26
HOLE
#32
HOLE
#14
HOLE
#8
FRONT-TO-REAR
SCSI-2 CABLE
ROUTING POINTS
HOLE
#7
CDU A
CDU B
4.1.2 TZLX-Series Tape Drive/Shelf Locations
Figure 4–2 shows the proper cabinet rail mounting holes for each shelf location
when TZLX-series tape drives are installed. Mounting hole numbers are counted
from the top of each rail. The hole number assignments shown in the figure
identify the mounting holes for each shelf’s
top
bracket screw and for the
round
standoff
chassis rail locating hole for TZLX-series tape drives. See Chapter 6
for detailed procedures pertaining to the mounting of StorageWorks shelves. See
Chapter 7 for detailed procedures pertaining to the mounting of the tape drive.
Note that the TZLX-series tape drive extends from the front to the rear of the
SH043 cabinet and utilize the upper two shelf mounting positions on each side.
4–2 Configuring SH043 Storage-Only Cabinets
