Stoll CMS 502 HP+ Operating Instructions Manual Download Page 201

Page: 201 / 562

201

Adjusting knitting machine

Advanced adjustments

Copying service data

4.2.7 Copying service data

With this menu the service data can be copied on a data carrier.

Copy service data window

"Copy service data" window

Keys in the Copy service data window

Label

Explanation

Copy Logfiles

If the machine computer has serious problems, e.g. it does

not react to any inputs or the program crashes any longer,

the cause is very important for Stoll. The computer saves

the data up to the fault internally in so-called "Logfiles".

These files can be saved and sent to the Stoll helpline so

that Stoll can carry out an exact error diagnostics.

Copy Dongle

The machine settings do not only contain the machine data,

but also the machine options, the machine configuration,

the report and other internal control information. It is

important to back up the data, e.g. when the hard disk is

replaced.

Copy Print

For the Stoll technician only

Copy Report

The operating data are saved with the STOLL machine

number.

Copy Mc

The machine data include the machine-specific settings

(correction values). The data will be saved in a zip-file.
When delivering the knitting machine, the machine data

was printed out and put on the right control cabinet.

Machine data sheet at the right control cabinet

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands