205
Adjusting knitting machine
4
Advanced adjustments
7. The reference run is complete, the machine is ready to knit.
The carriage is positioned at the correct position for you to be able to start
the production.
8. Switch back to the previous window.
Calling up and correcting
machine data
1. Call up the "Basic settings" menu.
2. Call up the "Machine parameters" window.
3. Compare the displayed values with the target values on the machine data
sheet and if necessary correct the values in the window "Machine
parameter" and confirm them.
4. Switch back to the previous window.
5. Call up the "Needle bed parameters" window.
6. Compare the displayed values with the values on the machine data sheet.
If necessary, correct the values on the machine data sheet.
7. Switch back to the previous window.
8. Call up the "NPK values" window.
9. Compare the displayed values with the target values on the machine data
sheet. If necessary, correct the values in the "NPK values" window and
confirm them.
10. Switch back to the previous window.
11. Call up the "Needle selection" window.
12. Compare the displayed values with the target values on the machine data
sheet. If necessary, correct the values in the "needle selection" window
and confirm them.
13. Call up the "Main menu".
Load knitting program and
determine racking reference
data
1. Load the knitting program.
2. Call up the "Machine start" window.
3. Tap on the key "SP from line 1".
4. Start the machine with the engaging rod.
The carriage assembly moves slowly and stops in the right reversing
position.
5. Wait until the "Racking finished" Message appears on the touch screen.
6. To switch on the needle selection, tap the needle selection "On" key in the
"Machine start" window.
The reference run is complete, the machine is ready to knit.
Summary of Contents for CMS 502 HP+
