Stoll CMS 502 HP+ Operating Instructions Manual Download Page 481

Page: 481 / 562

481

Software - Installation and basic settings

Boot process

Error diagnostics with Copy Logfiles

Error diagnostics with

Copy Logfiles

If the machine computer has serious problems, e.g. it does not react to any

inputs or the program crashes any longer, the cause is very important for Stoll.

The computer saves the data up to the fault internally in so-called Logfiles. For

an exact error diagnosis, we want to ask you to save these files and to send

them to the Stoll-Helpline.
1. Tap on the key "Copy Logfiles".



A selection window for saving a file is displayed.

2. Select the saving location.
3. Confirm input.



The log files are zipped, and saved on the target medium (file
name:Log_date_time_mcnr.zip).

Restore the last version of the Stoll operating system

Restore the last version of

the Stoll operating system

1. Tap on the key "Restore Last Version".



A dialog window for confirming the restoration appears.

2. Confirm message.



The "BootOkc" window is displayed. The source (Boot Source)
"Previous Version (HD)" is automatically set.

3. When the Stoll operating system is to be installed without the final

configuration tap on the key "Installation".
- or -

➜ When the Stoll operating system is to be installed with the final

configuration, tap on the key "Installation and Configuration".



The Stoll operating system gets installed.

The current operating system version will be overwritten!

When you restore the saved operating system version, the

current operating system version is overwritten.

Only carry out the following steps if you want to replace the

current operating system by the previous version.

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands