Stoll CMS 502 HP+ Operating Instructions Manual Download Page 479

Page: 479 / 562

479

Software - Installation and basic settings

Boot process

Enter the user name and the

password

1. In the "User Name" input field, tap the user name (5-15 characters).
2. In the "Password" input field, tap the corresponding password (5-15

characters).



A * (asterisk) appears for each character you enter.

Enter Workgroup ➜ In the "Workgroup" input field, tap the name of the work group and the

machine group for this machine (5-15 characters).

- or -
➜ Maintain the standard setting.

Enter the description of the

machine (Description)

➜ Enter a meaningful description of this machine (maximum 50 characters)

in the "Description" input field.

Enter E-Mail-Address 1. Activate the "Enable" check box.

2. Tap on the "Configure" key.



The "E-Mail Configuration" window is displayed.

3. Select the cases in the field Events by the appearance of which the e-mail

should be sent.

4. Enter the e-mail address in the "E-Mail address" field
5. Confirm input.

Further information:



KnitLAN connection [



290]

Advanced adjustments

Advanced adjustments For the Stoll technician only

Your Network administrator must create a user name and a

password before you can access the network resources.

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands