Stoll CMS 502 HP+ Operating Instructions Manual Download Page 545

Page: 545 / 562

545

Machine Management Tools

Send email directly from the machine



The "Send email" window opens.

Send email window on the machine

"Send email" window on the machine

Entries in the Send email window

Inputs

Explanation

"Delete all entries" key

(except the entry in the "from" field).

"Send email" key.

From

Sender of message.

The machine name is entered here as a sender as

standard.

If you are expecting an answer to the email, enter a valid

email address here as the machine cannot receive any

emails.

addressee of message.

Several addressee names are to be separated by a

semicolon (;).

Subject

Subject of the message.

Field for entering message text.

Mail attachment

"Unzipped" key:

In the "File name" field, displayed files are attached

unzipped to the message.
"Zipped" key:

The files which are displayed in the "File name" field are

zipped before they are attached to the message.

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands