Stoll CMS 502 HP+ Operating Instructions Manual Download Page 171

Page: 171 / 562

171

Adjusting knitting machine

Basic settings

Configuration symbol bar

4.1.17 Configuration symbol bar

The configurable toolbar allows you to jump directly to the individual windows

without having to take the "Detour" through the main menu or using the

"Additional functions" key. The toolbar is the headline or title bar of a window.

You can include the symbols of those windows which you use most often in

the toolbar.
The symbols can be called up in any window. To do so, tap the symbol on the

top left of the title bar and the symbols are displayed. (Exception: Tap on "Go

to mask" key in SINTRAL editor). To close the symbols again, tap the empty

field next to them.

Configuration toolbar Window

"Configuration toolbar" Window

Field/Key

Function

List of the windows which can be selected for the toolbar.

The toolbar contains the symbols of the selected windows. In

the above figure the carriage speed has been selected.

Key used to set a symbol in the toolbar (2).

Key used to remove a symbol from the toolbar (2).

Change the position of a symbol in the toolbar (2). To do so,

tap the symbol in the toolbar and use the corresponding key

to move it forwards or backwards.

If there are more than 11 symbols in the toolbar, the display

can be moved to the left or right with the arrow keys.

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands