Stoll CMS 502 HP+ Operating Instructions Manual Download Page 478

Page: 478 / 562

478

Software - Installation and basic settings

Boot process

Components of the "Network Configuration" window

Display/hide screen

keyboard

➜ In order to keep the virtual keyboard constantly open, activate the check

box before "Use Touch Screen Keyboard".



By clicking on an input field the virtual keyboard opens.

- or -
➜ In order to close the virtual keyboard deactivate the check box before "Use

Touch Screen Keyboard".

Enter the machine name

(Computer-Name)

1. Touch the "Computer Name" entry field.



The virtual keyboard is displayed.

2. Tap into the "Computer Name" by any desired name (5-15 characters) for

the respective knitting machine.
- or -

➜ Maintain the standard setting.

Use DNS

Domain Name Services via a DNS Server.

Enter the name of the IP address of the server, if

necessary.

Use WINS

Windows Internet Name Services.

Enter the name of the IP address of the server, if

necessary.

Gateway

A Gateway enables the connection between the

shared networks.

Enter the IP-Address of the active component, if

necessary.

Settings in the "Network Configuration" window, especially the

settings for External LAN, are to be done by a Network

Administrator. The settings for Internal LAN serve developers

purposes only and may not be altered.

The Ethernet IP addresses 192.168.0.0 to 192.168.0.255 are

reserved for Stoll knitting machines and may not be used in the

company network.

The reason for this: The cards 963 (IPC) and 966 (Power CPU)

in the knitting machine use these IP addresses to communicate

with each other. But if both these addresses are used in the

company network, the cards cannot work correctly with each

other anymore and the machine does not function any longer.

Label

Description

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands