Stoll CMS 502 HP+ Operating Instructions Manual Download Page 494

Page: 494 / 562

494

Software - Installation and basic settings

Installing the Stoll operating system

Start installation



The Stoll operating system was updated.



The machine is switched off.

1. Set the main switch to 1.



The "BootOkc" window is displayed with the following message on the
touch screen:

User Message window (START UPDATE NOW?)

"User Message" window (START UPDATE NOW?)

2. Deactivate the "Installation without configuration" check box, if the

machine parameters are also to be altered simultaneously with the

installation of the new Stoll operating system.
- or -

➜ Activate the "Installation without configuration" check box, if you do not

want to alter any machine parameters.

3. To start installation process tap on "YES".



In the "User Message" window (INSTALLATION STARTED!) the path
to the installation data is displayed.

User Message window (INSTALLATION STARTED!)

"User Message" window (INSTALLATION STARTED!)

4. If only the files that have got altered are to be installed anew during the

installation deactivate the "FORCE INSTALLATION" check box (expedites

the installation process).

To proceed with the old Stoll operating system, tap on "NO".

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands