Still FM-X Original Instructions Manual Download Page 36

Page: 36 / 292

Safety

Deﬁnition of terms used for responsible persons

Operating company

The operating company is the natural or legal

person or group who operates the truck or on

whose authority the truck is used.
The operating company must ensure that the

truck is only used for its proper purpose and in

compliance with the safety regulations set out

in these operating instructions.
The operating company must ensure that

all users read and understand the safety

information.
The operating company is responsible for the

scheduling and correct performance of regular

safety checks.
We recommend that the national performance

speciﬁcations are adhered to.

Specialist

A qualiﬁed person is deﬁned as a service

engineer or a person who fulﬁls the following

requirements:
• A completed vocational qualiﬁcation that

demonstrably proves their professional

expertise. This proof should consist of

a vocational qualiﬁcation or a similar

document.

• Professional experience indicating that

the qualiﬁed person has gained practical

experience of industrial trucks over a

proven period during their career During

this time, this person has become familiar

with a wide range of symptoms that require

checks to be carried out, such as based

on the results of a hazard assessment or a

daily inspection

• Recent professional involvement in the

ﬁeld of the industrial truck test in question

and an appropriate further qualiﬁcation

are essential. The qualiﬁed person must

have experience of carrying out the test

in question or of carrying out similar tests.

Moreover, this person must be aware of

the latest technological developments

50988078001 [EN]

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands