Still FM-X, Original Instructions Manual

Page: 45 / 292

Safety
3
Safety tests
Safety tests
Regular safety inspection of the truck
Safety inspection based on time and
extraordinary incidents
The operating company must ensure that the
truck is checked by a specialist at least once a
year or after particular incidents.
As part of this inspection, a complete check
of the technical condition of the truck must be
performed with regard to accident safety.
In addition, the truck must be thoroughly
checked for damage that could potentially
have been caused by improper use. A test
log must be created. The results from the
inspection must be retained until a further two
inspections have been carried out.
The inspection date is indicated by an adhe-
sive label on the truck.
– Arrange for the service centre to perform
periodic safety inspections on the truck.
– Observe guidelines for checks carried out
on the truck in accordance with FEM 4.004.
The operator is responsible for ensuring any
defects are remedied without delay.
– Contact your service centre.
NOTE
Observe the national regulations for your
country!
Insulation testing
The truck insulation must have sufficient insu-
lation resistance. For this reason, insulation
testing in accordance with DIN EN 1175 and
DIN 43539, VDE 0117 and VDE 0510 must be
conducted at least once a year.
NOTE
The truck’s electrical system and drive batte-
ries must be checked separately.
50988078001 [EN] 35