Still FM-X, Original Instructions Manual

Page: 123 / 292

Operation
5
Lifting
3
2 1
4
1 2
3
4
DANGER
Reaching or climbing between moving parts of the
truck (e.g. lift mast, sideshifts, working equipment,
load carrying devices etc.) can lead to serious injury
or death and is therefore prohibited.
– Always observe the safety regulations for hand-
ling loads; see ⇒ Chapter "Safety regulations
when handing loads", P. 5-119.
– Only operate the lifting system from the driver’s
seat.
Lifting/lowering the fork carriage
To lift the fork carriage:
– Pull the "lift/lower" operating lever (1)
backwards.
To lower the fork carriage:
– Push the "lift/lower" operating lever (1)
forwards.
Shifting
To extend the reach carriage:
– Push the "shift" operating lever (2) forwards.
To retract the reach carriage:
– Pull the "shift" operating lever (2) back-
wards.
Tilting the lift mast or fork carriage
(variant)
Depending on the truck equipment, either the
entire lift mast is tilted or just the fork carriage
(fork tilt device).
To tilt the lift mast forwards:
– Push the "tilt" operating lever (3) forwards.
To tilt the lift mast backwards:
– Pull the "tilt" operating lever (3) backwards.
Transition shift (variant)
Depending on the truck equipment, either the
entire lift mast is shifted to the side or just the
fork carriage (fork sideshifter).
Transition shift to the left:
50988078001 [EN] 113