Still FM-X Original Instructions Manual Download Page 14

Page: 14 / 292

Foreword

Information about the documentation

Documentation scope

• Operating instructions
• Operating instructions for attachments

(variant)

• Spare parts list
• VDMA rules for the proper use of industrial

trucks

These operating instructions describe all mea-

sures necessary for the safe operation and

proper maintenance of your truck in all pos-

sible variants available at the time of printing.

Special versions to meet customer require-

ments are documented in separate operating

instructions. If you have any questions, please

contact your authorised service centre.
Enter the production number and year of

manufacturer from the nameplate in the space

provided:
Production number

...............................................
Year of manufacture

...................................................
Please quote the production number during all

technical enquiries.
Each truck comes with a set of operating

instructions. These instructions must be

stored carefully and must be available to the

driver and operating company at any time. The

storage location is speciﬁed in the "Overviews"

chapter.
If the operating instructions are lost, the

operator must obtain a replacement from the

manufacturer immediately.
The operating instructions are included in the

spare parts list and can be reordered there as

a spare part.
The personnel responsible for operating and

maintaining the equipment must be familiar

with these operating instructions.
The operating company must ensure that all

users have received, read and understood

these instructions.

50988078001 [EN]

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands