Still FM-X Original Instructions Manual Download Page 173

Page: 173 / 292

Operation

Lift height preselector (variant)

– After entering the target level (e.g. A1),

press the button for placing into stock (1).

The symbol for placing into stock (3) and

"auto" for automatic operation (4) appear in

the assistant (2). The display (5) changes

from the target height to the distance to the

target (target difference).

– Activate the lift function (displayed by

the assistant). The selected height plus

the pallet free lift height is reached and

the automatic stop is performed (6). The

display (5) shows a distance to the target

≤

6 mm.

– Drive up to the racking (7).
– Activate the LS shifting function (shown by

the assistant) and push the pallet onto the

shelf (8).

– Activate the lowering function (shown by

the assistant). The forks are lowered by the

pallet free lift (9) height.

– Activate the DS shifting function and retract

the reach carriage completely (shown by

the assistant) (10).

The automatic routine is complete. All func-

tions are available again (= manual operation).
– Back the truck away (11).

50988078001 [EN]

163

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands