Still FM-X Original Instructions Manual Download Page 158

Page: 158 / 292

Operation

Operating auxiliary equipment

Clipboard (variant)

You have the option of using a clipboard (1) to

secure your work papers. This clipboard can

be inserted into a slot in the multifunctional

panel. To do so, the standard cover of the

multifunctional panel must be removed.

FleetManager (variant)

FleetManager is an equipment variant and

can be ﬁtted to the truck in different versions.

The description and operation information can

be found in the separate operating instructions

for the corresponding FleetManager versions.

Accident recorder (variant)

The accident recorder is an equipment variant

to the FleetManager (variant), which is in-

stalled in the truck’s acceleration sensor. The

acceleration sensor records data in the event

of an accident. This data can be electronically

read out and evaluated. For further informa-

tion, contact your STILL service centre.

148

50988078001 [EN]

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands