Still FM-X, Original Instructions Manual

Page: 93 / 292

Operation
5
Commissioning
Setting the drive programme
Setting
The driving and braking characteristics of the
drive can be set on the display and operating
unit.
Four different drive programmes can be set.
Depending on the drive programme selected,
different driving characteristics are applied in
relation to the maximum speed, acceleration
behaviour* and deceleration behaviour**.
Essentially, the higher the number of the drive
programme, the greater the driving dynamics.
When a truck is delivered, it is set to drive
programme 4 (P4).
The factory-set parameters are shown in the
table.
Code 1 2 3 4
V
max
(km/h) 10
12 14 14
*m/s
2
0.6 1.1 1.4 1.8
**m/s
2
0.8 1.0 1.0 1.2
NOTE
Only the drive programme can be changed.
The characteristic for the relevant drive pro-
gramme can only be changed by authorised
service personnel.
Adjustment process
– The drive profile changes each time the "P"
button (1) is pressed (P1 - 4).
– The selected drive programme is indicated
on the display (2).
Creep speed drive programme
– Push the "tortoise" button on the display
and operating unit.
– The "tortoise" symbol appears on the
display and the "creep speed" drive pro-
gramme is selected.
50988078001 [EN] 83