Still FM-X, Original Instructions Manual

Page: 66 / 292

5
Operation
Checks and tasks to be carried out prior to commissioning
Checks and tasks to be carried out prior to commissioning
Visual inspections
WARNING
Risk of accident due to damage or other defects on
the truck or on the attachment (variant)!
Damage to the truck or the attachment (variant) can
lead to unpredictable and dangerous situations.
If damage or other defects are identified on the
truck or attachment (variant) during the following
inspections, the truck must not be used until it has
been properly repaired.
– Do not remove or deactivate safety systems or
switches.
– Do not change any predefined set values.
– Do not use the truck until it has been properly
repaired.
WARNING
There is a risk of falling when working on high parts
of the truck.
– Use only the steps provided on the truck.
– Do not stand on truck components or use them
to help you climb onto the truck.
– Use suitable equipment.
1
2
Prior to commissioning, ensure that the truck
is safe for operation:
• All covers must be fitted and closed
• The fork arms must be secured against
lifting and shifting
• The locking devices (1) of the fork arms
must not be damaged or deformed
• Fork arms and other lifting accessories
must not show any noticeable damage (e.g.
bends, cracks, significant wear)
• The roller tracks (2) must be lubricated with
a visible grease film
• The slide tracks of the reach carriage must
be lubricated with a visible film of grease
• The chains must not be damaged and must
be evenly and adequately tensioned
• Check the area under the truck for leaking
consumables
• The guard grille (variant) and overhead
guard or weather protection cab/cold store
56 50988078001 [EN]