Still FM-X, Original Instructions Manual

Page: 132 / 292

5
Operation
Handling loads
of dynamic forces such as braking. A load
which is otherwise resting safely on the fork
arms may move forward and fall. However,
If the fork arms are too long they can catch
on loading units behind the load, which then
fall over when the load is raised. For help
with selecting the correct length of fork arms,
contact a qualified service engineer.
DANGER
Risk of accident from falling load!
When transporting small items, attach a load
backrest (variant) to prevent the load from falling
on the driver.
A closed roof covering (variant) should also be
used.
Removable roof panels must not be removed.
1
Adjusting the fork
– Lift the locking lever (1) and move the fork
arms to the desired position.
– Allow the locking lever to snap back into
place.
The load centre of gravity must be midway
between the fork arms.
– Only actuate the fork prong positioner
(variant) when the fork is not carrying a
load.
Danger area
The danger area is the area in which people
are at risk due to the movements of the truck,
its working equipment, its load-carrying
equipment (e.g. attachments) or the load.
Also included are the areas where loads
could fall or working equipment could fall or
be lowered.
122 50988078001 [EN]