Still FM-X, Original Instructions Manual

Page: 155 / 292

Operation
5
Working with attachments
1
3
2
4
Operating the clamp locking mech-
anism (variant) with the fingertip
switch
This truck can be fitted with a clamp locking
mechanism as a variant. This prevents the
clamp from opening unintentionally if the
operating function is inadvertently triggered.
DANGER
There is a risk of fatal injury from falling loads if the
correct function of the clamp locking mechanism is
not guaranteed!
If other attachments are used on this truck in addi-
tion to the clamp, make sure that the clamp locking
mechanism function is reassigned to the corre-
sponding operating device every time the clamp is
reassembled; see the chapter entitled "Fitting at-
tachments".
– Make sure that the additional clamp locking
mechanism function is available.
NOTE
The operating lever that has the "clamp
release" function assigned to it is (1) marked
by a pictogram; also refer to the chapter
entitled "Working with attachments".
Closing the clamp with the fingertip
switch
It is not necessary to release the clamp locking
mechanism in order to close the clamp.
Proceed as follows to close the clamp:
– Press and hold shift button "F" (2) and move
the operating lever (3) backwards.
Opening the clamp with the fingertip
switch
To open the clamp, the clamp locking mecha-
nism must first have been unlocked. Proceed
as follows to unlock the clamp locking mecha-
nism:
– Press and hold shift button "F" (2) and move
the operating lever (3) forwards.
– Keep shift button "F" depressed and move
the operating lever back into the neutral
position.
50988078001 [EN] 145