Still FM-X Original Instructions Manual Download Page 84

Page: 84 / 292

Operation

Commissioning

Entering truck operating data via the

display and operating unit

Authorisation levels

The authorisation levels determine which

operating data and functions the user can

access. The higher the authorisation level,

the more comprehensive the access to truck

operating data.
The display and operating unit is used to

access operating data at three authorisation

levels:
• Level 1 (driver)
• Level 2 (ﬂeet manager)
• Level 3 (authorised service centre)
The access rights are predeﬁned ex works

within the different authorisation levels.

Individual access rights can be moved to a

higher authorisation level.

Level 1 (driver)
Access:

Press the OK button for two seconds

Authorisations:

Set the time (can be moved to a higher authori-

sation level)
Set the date (can be moved to a higher authori-

sation level)
Set the language (can be moved to a higher

authorisation level)

Level 2 (ﬂeet manager)
Access:

Press OK and ESC for 4 seconds

and enter the password for level 2

Authorisations:

Battery

- Type

- Capacity
Read out the software and hardware status
Read out the error memory
Toggle the units
Teach-in the lift height preselector (can be

moved to a higher authorisation level)

50988078001 [EN]

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands