Still FM-X Original Instructions Manual Download Page 70

Page: 70 / 292

Operation

Checks and tasks to be carried out prior to commissioning

Adjusting the MSG 65/MSG 75

driver’s seat

DANGER

There is a risk of accident if the seat or seat backrest

shifts suddenly, which could cause the driver to

move in an uncontrolled manner. This can result

in unintentional actuation of the steering or the

operating devices and thus cause uncontrolled

movements of the truck or load.
– Do not adjust the seat or seat backrest while

driving.

– Adjust the seat and seat backrest so that all

operating devices can be actuated safely.

– Ensure that the seat and seat backrest are

securely engaged.

WARNING

To obtain optimum seat cushioning, you must ad-

just the seat suspension to your own body weight.

This is better for your back and protects your health.
– To prevent injury, make sure that there are no

objects within the seat’s swivel area.

Moving the driver’s seat

– Lift the lever (1) and hold.
– Push the driver’s seat into the desired

position.

– Release the lever.
– Ensure that the driver’s seat is securely

engaged.

50988078001 [EN]

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands