Still FM-X, Original Instructions Manual

Page: 103 / 292

Operation
5
Driving
Observe the information in the chapter entitled
"Safety regulations when driving".
The driver’s seat is equipped with a seat
switch. In the event of an operating error
or malfunction, see the chapter entitled
"Enabling truck functions using the foot switch
and seat switch".
– Lift the fork carriage until the necessary
ground clearance is achieved.
– Tilt the lift mast backwards.
– Release the parking brake.
– Select the desired drive direction.
The selected drive direction is shown on the
display and operating unit (1).
NOTE
Depending on the equipment, an acoustic or
visual warning signal is issued in relation to
the drive direction (variant).
2
– Actuate the accelerator pedal (2).
The truck will travel in the selected drive direc-
tion. The speed is controlled by the accelera-
tor pedal position. When the accelerator pedal
is released, the truck decelerates.
NOTE
The truck can be held at a standstill briefly
on upward or downward gradients without
actuating the parking brake (anti-roll brake
for slopes). The truck will then begin to creep
downhill slowly.
Changing the drive direction
– Remove foot from accelerator pedal.
50988078001 [EN] 93