Still FM-X Original Instructions Manual Download Page 149

Page: 149 / 292

Operation

Working with attachments

– Actuate the shift button "F"(1).
– Move the joystick in the direction of the

arrow "4" or "5". Or:

– Move the vertical rocker button (6) to the left

or right.

NOTE

The movement/action of these additional

functions can be found in the operating

instructions of the ﬁtted attachment.

NOTE

The pictograms on the joystick are applied

according to the attachments ﬁtted to this

truck at the factory. If an attachment with other

functions is ﬁtted, the pictograms must be

checked for the correct representation and

changed if necessary. Please contact the

service centre if necessary.

– Note the following attachment functions and

pictograms!

Overview of pictograms and operating devices

50988078001 [EN]

139

Summary of Contents for FM-X





































































































































































































































































































Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands

Still FM-X, Original Instructions Manual

Search results

Summary of Contents for FM-X

Reviews:

Related manuals for FM-X

Brands by name

Popular brands