Sperry Marine NAVIKNOT 600 SD, Operation, Installation And Service Manual

Page: 38 / 256

056353/J NAVIKNOT 600 SD
2-8 Display Indications in Normal Operational Mode
Docking Display
The main display shows a graphical
representation of the vessel, indi-
cating the actual longitudinal speed
over ground as well as the trans-
verse ground speeds at the bow
and at the stern.
Arrow symbols indicate the direc-
tion in which the vessel is moving
(up = ahead, down = astern, right =
to stb., left = to port).
The values themselves are dis-
played without sign.
The sidebar shows the GPS signal
status and the data used to calcu-
late the speeds displayed, i.e. the
vessel’s heading (ROT), the direc-
tion of the motion vector (course
over ground, COG) and the rate of
turn (ROT).
Satellite Status
The main display shows the actual
GPS position as received from the
satellite PCB.
A tabular overview is given of the
satellites in view as well as the
respective satellite’s signal-to-noise
ratio, azimuth and elevation.
The sidebar shows the GPS signal
status and the current HDOP and
VDOP figures as received from the
satellite PCB.
Alert Page
The alert page list the alert ID, alert
message and acknowledge status of
all active alerts.

The alert with the topmost alert
priority is always shown first.
The sidebar shows the current
HDOP and HDOP figures as
received from the satellite PCB.
The alert list shows
„No alert condition“
in case no alert exists.
MASTER
600 SD
COG
ROT °/min
124.56
m/s
HDG
123.45
2.4
NO ALERTS
MASTER
600 SD
GPS POSITION
N 5 4 °1 1 . 8 9 0 '
NO SAT SNR AZ EL
06 19 16 52 41
01 07 04 47 31
02 11 16 43 27
03 03 12 49 33
04 22 09 41 39
05 08 11 57 38
0 W 0 7 °4 8 . 2 7 0 '
08
09
10
11
12
07
NO ALERTS
HDOP
VDOP
4.0
3.6
MASTER
600 SD
(1/3)
ALARM NO: 71
EXT HDG TIMEOUT
ACTIVE
NOT ACKNOWLEDGED
HDOP
4.0
VDOP
3.6
ALERT LIST
> <
MASTER
600 SD
NO ALERT CONDITION
HDOP
4.0
VDOP
3.6
ALERT LIST