Sperry Marine NAVIKNOT 600 SD, Operation, Installation And Service Manual

Page: 31 / 256

NAVIKNOT 600 SD 056353/J
Display and Operating Keys 2-1
Chapter 2: Operation
2.1 Display and Operating Keys
Figure 2-1:
NAVIKNOT 600 SD
operating unit
���
Main Display
1
: shows one of five selectable pages, indicating
– Ground speeds, longitudinal and transverse
– Water speed, longitudinal
– “Docking” display (longitudinal and bow and stern trans-
verse ground speeds)
– Satellite status page
– Alert page
1 Display and operating keys apply for new CDU type 5001 Rev. F with key
ACK MUTE. Legacy CDU types 5001 and 5002 with ACK key remain usable.
���
Sidebar: Shows additional information, indicating
• Operating mode (Master or Remote).
���
• Alert Status
–
Alert status, index number, total number of alerts and alert
message are shown.
���
• Supplementary Data, depending on active main display page
–
on ground speed page: total and daily mile counters
– on docking display page: heading, course over ground and
rate of turn
– on satellite status page: GPS HDOP/VDOP
– on alert page: alert ID, alert messages and acknowledge sta-
tus, GPS HDOP/VDOP
���
ACK MUTE
key . Acknowledges pending (active) alerts;
mute (silence) audible alert indication.
���
MENU
key . Calls up or quits the menu mode.
���
MASTER
key . Requests Master operating mode for this unit.
���
Navigation Keypad: In normal operational mode,
UP
,
DOWN
keys scroll through main display pages.
LEFT
,
RIGHT
keys scroll through list of active alerts.
In menu mode,
UP
,
DOWN
,
LEFT
,
RIGHT
keys navigate through the operating menu;
ENTER
confirms and stores settings made in the menu mode.
���������
DIM–
/
DIM+
. Adjust the display brightness.
MASTER
600 SD
N.MILES
DAILY
TOTAL
kn
1234.56
123456.7
12
8
.
0
0
.
12
NO ALERTS
ENTER
ACK
MUTE
MENU MASTER
DIM
-
DIM
+
NAVIKNOT
1
2 5 6 7
10 9 8 4
3