Sperry Marine NAVIKNOT 600 SD, Operation, Installation And Service Manual

Page: 93 / 256

NAVIKNOT 600 SD 056353/J
Alert Codes and Messages 3-35
3062 3 W Sensor
fault No water
speed sensor
found Error is cleared
once transducer
protocol has been
determined. If error
persists, check pre-
amplifier D for
proper operation.
3003 1 C Lost ROT ROT auto
switchover to
antenna input
3003 2 C Lost
HDG HDG auto
switchover to
antenna input
3008 4 W Lost
trans
speed Not enough
satellites in
view or invalid
data
3008 5 W Lost
long
speed Not enough
satellites in
view or invalid
data
3003 3 C Lost ext
dim Check com-
munication
with ext. dim
device Check connection
between dimming
device and electron-
ics unit.
3003 2 W Antenna
fault No antenna
found
96
2 - W EU
TIME-
OUT Communica-
tion lost
between elec-
tronics unit
and CDU Check basic opera-
tion of the electron-
ics unit (valid
output generated at
serial data / ana-
logue outputs);
Check cabling
between CDU and
electronics unit.
1 The alert ID „10020“ is always five digit as an exception.
2 The alert ID „96“ is always two digit as an exception.
Alert
ID Alert
Inst. Alert
Prio Alert
Title Alert
Description Corrective Action
Note In case of an “EU timeout” alert, dashes will appear in the CDUs speed
and distance displays. The timeout will be shown as the only alert condi-
tion, as the CDU receives no messages from the electronics unit when
communication is lost.