Sperry Marine NAVIKNOT 600 SD, Operation, Installation And Service Manual

Page: 26 / 256

056353/J NAVIKNOT 600 SD
1-14 Technical Data
Control and Display Units (CDU)
Note From March 2016 on, the NAVIKNOT 600 S Control and Display Unit
(CDU) type 5002 cannot longer be manufactured or serviced and is there-
fore not available anymore as basic system equipment or spare part.
Legacy CDUs of type 5002 may be used as system equipment as long as
remaining operable.
Environmental Requirements
ambient temperature, operation - 15° C – + 55° C
ambient temperature, storage - 25° C – + 70° C
protection grade, main CDU and
3x1 remote unit IP 23 to DIN EN 60529
protection grade, 2x1 remote unit PN 73506 : frontside IP 65 to DIN
EN 60529, if installed with seal in
console panel; IP 23 if installed in
console frame
PN 73507 (in housing with
bracket):
IP 65 to DIN EN 60529
environmental conditions / EMC in accordance with IEC 60945
Power supply
supply voltage 24 VDC
max. ripple content -10% – +20% Vpp
power consumption 14 W max. (3x1 unit)
4 W max. (2x1 unit)
Magnetic Clearance
to standard magnetic compass 0.70 m (3x1 unit)
0.80 m (2x1 unit)
to steering magnetic compass 0.40 m (3x1 unit)
0.50 m (2x1 unit)
reduced, to standard magnetic compass 0.45 m (3x1 unit)
0.50 m (2x1 unit)
reduced, to steering magnetic compass 0.30 m (3x1 unit)
0.30 m (2x1 unit)