Sperry Marine NAVIKNOT 600 SD, Operation, Installation And Service Manual

Page: 124 / 256

056353/J NAVIKNOT 600 SD
6-16 Service Setup Menu
MESSAGES NMEA 1-3
Selects the NMEA sentences to transmit.
If the NAVIKNOT 600 SD cannot provide valid data for an NMEA sen-
tence field, a null field (empty field) is sent. Status fields for invalid or
unknown data are marked invalid (“V“). Other sentences than those
described below must not be activated for the NAVIKNOT 600 SD.
Settings: VBW
Longitudinal and transverse ground speed and speed status
(valid/invalid) are transmitted using the $--VBW sentence
.
VHW
Longitudinal water speed is transmitted using the $--VHW
sentence.
VLW / VLW extended
The distance travelled since last reset (daily miles) and total
cumulative distance (total miles) are transmitted using the
$--VLW sentence. The “extended” form of the sentence
includes
trailing fields for ground distances as per IEC 61162-1/
Ed. 3. The non-extended form omits these fields.
VTG
The vessel’s speed over ground in the direction of its motion
vector or “course over ground” is transmitted using the
$--VTG sentence.
PPLAK
Log status and operating mode information is transmitted
using the proprietary $PPLAK sentence.
PEDIB
All relevant data to operate an EMRI DIB10 docking informa-
tion display in slave mode is transmitted using EMRI’s pro-
prietary $PEDIB sentence.
ALERT MESSAGES
OFF
No alert conditions and acknowledgement states are trans-
mitted.
ALR
Information on alert conditions and their acknowledgement
state are transmitted using the $--ALR sentence.
When no alerts are present, a “no alert” message is trans-
mitted cyclically, as recommended in IEC 80/520/INF.
ALF/ALC/ARC
Information on alert conditions and their acknowledgement
state are transmitted to the BAMS (Bridge Alert Manage-
ment System) using the $--ALF, $--ALC, and $--ARC, sen-
tences.
When no alerts are present, a “no alert” message is trans-
mitted cyclically, as recommended in IEC 80/520/INF.