NAVIKNOT 600 SD
056353/J
ix
Note
From NAVIKNOT EU type 5003-AA software version Rev. A, 2.000 on
(respectively for legacy NAVIKNOT EU types 5003/5004 with software
version Rev. J, 1.050), both CDU types 5001 and 5002 can be used for a
basic NAVIKNOT 600 SD system.
Note
From March 2016 on, the NAVIKNOT 600 S Control and Display Unit
(CDU) type 5002 cannot longer be manufactured or serviced and is there-
fore not available anymore as basic system equipment or spare part.
Legacy CDUs of type 5002 may be used as system equipment as long as
remaining operable.
Note
Display and operating keys in this manual apply for the new NAVIKNOT
CDU type 5001, Rev. F, with a combined ACK MUTE key.
Legacy NAVIKNOT CDU types 5001 and 5002 with ACK key and identical
key functionality remain usable.
Note
The NAVIKNOT system operating status is indicated by a point alter-
nately flashing close behind „MASTER“ or „REMOTE“, highlighting that
the display indication is active (not freezed).
Note
The NAVIKNOT 600 SD system includes the Preamplifier D with installed
retrofit heatsink cover, stock no. 025961-0000-000, for enhanced heat dis-
sipation.
For retrofitting Preamplifier D with the legacy cover plate, see the sepa-
rate retrofit instructions, doc. no. 5005-0125-03.
Note
NAVIKNOT complies with the statutory requirements regarding a serial
interface for the alert management (alert presentation and acknowledge-
ment) by a Central Alert Management System (CAM) following IEC 61162
(NMEA 0183) and MSC.302(87) (BAMS).
Note
The differentiation of the alert handling is by selecting either
ALR (for AMS/CAMS) or ALF/ALC/ARC (for BAMS) as NMEA message in
the Service Setup 600
Note
The selection of the alert management system must be chosen according
to ship classification requirements and hardware equipment during
installation and must not be changed when the ship is in operation.
Note
Sperry Marine Service:
In case of service refer to
www.sperrymarine.com/offices
for a list of
all Sperry Marine Offices and Service Agents worldwide.
Summary of Contents for NAVIKNOT 600 SD
