Chapter 8 - Managing Network Attached Storage
Managing NAS Replication
3.
Select the replication target in the Replication service details screen, and select
Action >
Edit
. The Modify Replication Service dialog box displays.
Figure 173
The Modify Replication Service dialog box.
4.
If desired, modify the IP address or hostname of the management port of the target in the
Replication Target
field.
Note:
Do not use http:// or https:// to precede the IP address or hostname.
5.
If desired, modify the IP address of the target’s data port in the
Replication Target Data IP
Address
field.
Note:
Do not use http:// or https:// to precede the IP address or hostname.
6.
If desired, modify the username of a user configured on the target in the
Username
field.
7.
Enter the user password in the
Password
field, if one is set. Otherwise, leave the field
blank.
8.
If desired, select the
Enable Secure Transfer
check box to configure the system to encrypt
the replicated data before transferring it to the target, or clear the check box to transfer
data without encryption. Data is encrypted using Secure Socket Layer (SSL).
9.
Click
Save
.
Delete the NAS Replication Service Configuration
1.
On the source system’s BlackPearl user interface, select
Configuration > Services
to
display the Services screen (see
).
November 2020
User Guide-BlackPearl Converged Storage System
- 265 -
