6-13
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
RK4
x
25
(with drop-safe)
RK4
x
25
(with drop-safe)
EX front
panel
assembly
φ
6
poly washer
RK4
x
25
(with drop-safe)
Drive stage panel
Portion A
Portion B
(3) Loosen the two screws (a) and the screw (b) to remove
the side plate support (top) in the direction of the
arrow. Then, remove the two screws (a).
4.
Remove the EX front panel assembly of the extension
console.
(1) Loosen the four screws (with drop-safe) and remove
the EX front panel assembly in the direction of the
arrow.
n
These screws have drop-safe washers. Be careful not
to remove the screws.
5.
Remove the drive stage panel of the extension console.
(1) Loosen the two screws (with drop-safe) and open the
drive stage panel.
n
These screws have drop-safe washers. Be careful not
to remove the screws.
(2) Remove the drive stage panel from the pin at portion B
by raising it slightly while pulling portion A in the
direction of the arrow as shown. Remove then the
drive stage panel from the console.
n
Be careful not to drop the
φ
6 poly washer. If it is
dropped, insert it into the pin of portion B as shown in
the figure.
6-5. Connecting Extension Consoles
Side plate support (top)
(b) PWH4
x
8
(a) PWH4
x
8
