3-7
BKS-R3219A/R1617A I&SSM
Menu screen/secondary station
When you want to call the secondary station menu screen,
select the [R: CALL SECONDARY STATION] from the
menu of the primary station and enter the station ID of the
secondary station.
When you want to set the secondary station function into
the primary station routing switcher, enter “1” as the
station ID of the secondary station.
Perform the respective settings that are shown in Section 3-
4 on the secondary station menu screen.
When
[Ctrl]
_
[D]
are pressed on the secondary station
menu screen, the display returns to the primary station
menu screen.
n
Response of the routing switcher system becomes slower
while the menu screen or the setup screen is being displayed
when compared with the response on the system status
screen. For avoiding this trouble, return the display to the
system status screen when the setting up is completed.
Setting Screen
The setting screen appears when any of the setup item is
selected from the primary station or the secondary station
menu screen.
The actual setting is performed on this screen.
Because the screens are different depending upon the
setting items, the screen examples are shown in the
respective setting items (Section 3-4.)
When
[Ctrl]
_
[E]
are pressed on the secondary station
setting screen, the display returns to the secondary station
menu screen. When
[Ctrl]
_
[D]
are pressed, the display
returns to the primary station menu screen.
When
[Ctrl]
_
[E]
are pressed on the primary station
setting screen, the display returns to the primary station
menu screen.
n
Response of the routing switcher system becomes slower
while the menu screen or the setup screen is being displayed
when compared with the response on the system status
screen. For avoiding this trouble, return the display to the
system status screen when the setting up is completed.
Secondary station menu screen (BKS-R3219A)
SONY ROUTING SYSTEM SETUP MENU
BKS-R3219A V2.23
STATION NUMBER 4
Ctrl-D:RETURN
MODIFICATION COMMAND
H: SET PHANTOM TABLE
N: SET PANEL TABLE
O: SET AVAILABLE SOURCE/DESTINATION
R: SET ROUTE
L: COPY TABLE DATA FROM
Y: SET DISPLAY MODES
Z: SET PANEL STATUS
S: DISPLAY DESCRIPTION/ALIAS NAME