Sony BKS-R1617A Page 11 Installation And Setup Manual Download | Manualshive

Page: 11 / 66

background image

1-3

BKS-R3219A/R1617A I&SSM

1-4. Constituent Devices of Routing Switcher System

The routing switcher system consists of the following four types of equipment.

.....

Routing switcher controller (HKSP-R80)

It controls the signal switching for the routing switcher in accordance with the commands from the host
controller (such as host computer) and remote control panel.

.....

Routing switcher (IXS, HDS, DVS, BVS series)

The switcher with a built-in controller and the one without it are available.
The built-in controller type switches signals according to the command from the controller (such as
host computer) and the remote control panel. The routing switcher without a built-in controller (such as
a secondary station) switches signals by following the commands from the controller. Varied switchers
are available for different types of signals such as serial digital video, digital audio, time code, RS-
422A, etc.

.....

Routing switcher control unit (Remote control panel) (BKS-R series)

It is used to switch signals and to display the name of the selected signal. It is sometimes simply called
as “remote control panel”.

.....

Personal computer

A personal computer is required in order to establish the various setups that are necessary for configur-
ing and running the routing switcher system using a terminal emulator. The setup data are backed up
and restored with the BZR-20 that is supplied with the IXS-6600/IXS-6700, HKSP-R80 and HDS-
X5800.
A personal computer having the following specifications is recommended for use with the routing
switcher system.

.

IBM PC/AT compatible personal computer

.

Windows XP (English version or Japanese version)

.

RS-232C port or Ethernet is installed.

.

Terminal emulator (VT100 or higher) is installed.

.

The codes of F1 to F5 are already set.

n

For the code setting procedure, refer to Section 2-2.

.

BZR-20 (V2.11 or higher) is installed.

n

For the BZR-20 installation procedure, refer to the Installation Manual in the CD-ROM supplied with
the IXS-6600/IXS-6700, HKSP-R80 and HDS-X5800 .

.

Microsoft Excel is installed.

.

DirectX (V6.1a or higher) is installed.

.

BZR-2000 (V1.70 or higher) is installed when using GUI for setup.

.

«
...
9
10
11
12
13
...
»

Summary of Contents for BKS-R1617A



































































Reviews:

No comments

Related manuals for BKS-R1617A

DELTAFLUX MT100

Brand: PIETRO FIORENTINI Pages: 16

Brand: Haier Pages: 58

Brand: 1Control Pages: 8

Brand: Jetline Pages: 58

Brand: Farfisa Pages: 20

Brand: Racal Instruments Pages: 64

Brand: Hama Pages: 7

Brand: Hama Pages: 44

Brand: RadioMaster Pages: 10

Brand: K&K Pages: 6

Brand: jcm-tech Pages: 8

Brand: Ultra Start Pages: 24

Brand: Nice Pages: 32

Brand: Acumen Pages: 6

Brand: PCB Piezotronics Pages: 12

Brand: Skov Pages: 68

Brand: Rain Bird Pages: 11

LOOPDRIVE FIM-RC

Brand: 4EVAC Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands