3-12
BKS-R3219A/R1617A I&SSM
Setting 4DESTINATION mode:
The selection buttons are divided into four blocks. A
destination can be set for each block.
Example setting 4DESTINATION mode (BKS-R1617A)
Setting the TAKE button:
The TAKE function can be set to any selection button.
1.
Use the cursor keys to select a source key.
2.
Press
[T]
to set the TAKE button. TAKE is displayed
for the button set with the TAKE function.
n
The TAKE button can be used in modes such as
Type+Num mode.
Setting the monitor button:
The monitor function can be set to any selection button.
1.
Use the cursor keys to select a source key.
2.
Press
[M]
to set the monitor button. MONI is dis-
played for the button set with the monitor function.
n
The monitor function monitors selection information in a
destination by setting MONITOR DESTINATION of
menu Z. The function always automatically selects the set
destination and the same source. For more information,
refer to the Z menu.
Setting the VTR control function:
EJECT, REC, REW, PLAY, F FWD, or STOP functions
can be set to any selection button and used to control the
VTR from the control panel.
1.
Use the cursor keys to select a source key.
2.
Press
[V]
to enter setting mode for the VTR control
function.
3.
A list of operations is displayed on the bottom of the
screen. Enter the number 0 to 5 corresponding to the
operation that you want to set.
VTR operation key setting screen
Setting the LEVEL key:
A level can be set to any selection button, allowing it to be
used as a LEVEL button.
1.
Use the cursor keys to select a source key.
2.
Press
[E]
to enter setting mode for the level control
button.
3.
A list of level control buttons is displayed on the
bottom of the screen. Enter the number 0 to the letter Z
corresponding to the LEVEL that you want to set.
Level control button setting screen
BKS-R3219A
Block 1
Block 2
Block 3
Block 4
BKS-R1617A
Block 1
Block 2
Block 3
Block 4
0=EJECT 1=REC 2=REW 3=PLAY 4=F FWD 5=STOP 6=.... 7=....
8=.... 9=.... A=.... B=.... C=.... D=.... E=.... F=....
G=.... H=.... I=.... J=.... K=.... L=.... M=.... N=....
O=.... P=.... Q=.... R=.... S=.... T=.... U=.... V=....
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME T:TAKE M:MONI V:VTR E:LEVEL
0=LVL1 1=LVL2 2=LVL3 3=LVL4 4=LVL5 5=LVL6 6=LVL7 7=LVL8 8=L1-2
9=L1-3 A=L1-4 B=L1-5 C=L1-6 D=L1-7 E=L1-8 F=L2-3 G=L2-4 H=L2-5
I=L2-6 J=L2-7 K=L2-8 L=L3-4 M=L3-5 N=L3-6 O=L3-7 P=L3-8 Q=L4-5
R=L4-6 S=L4-7 T=L4-8 U=L5-6 V=L5-7 W=L5-8 X=L6-7 Y=L6-8 Z=L7-8
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME T:TAKE M:MONI V:VTR E:LEVEL
SONY ROUTING SYSTEM SETUP MENU BKS-R1617A V2.23 STATION NUMBER 5
SET PANEL TABLE(SOURCE) CONTROL DESTINATION = OUT001
01 KEY=IN001 02 KEY=IN002 03 KEY=IN003 04 KEY=IN004
05 KEY=IN001 06 KEY=IN002 07 KEY=IN003 08 KEY=IN004
09 KEY=IN001 10 KEY=IN002 11 KEY=IN003 12 KEY=IN004
13 KEY=IN001 14 KEY=IN002 15 KEY=IN003 16 KEY=IN004
SET PANEL TABLE(DESTINATION)
01 KEY=OUT001 02 KEY=OUT002 03 KEY=OUT003 04 KEY=OUT004
05 KEY=....... 06 KEY=....... 07 KEY=....... 08 KEY=.......
09 KEY=....... 10 KEY=....... 11 KEY=....... 12 KEY=.......
13 KEY=....... 14 KEY=....... 15 KEY=....... 16 KEY=.......
0=IN 1=OUT 2=GPH 3=LPH 4=.... 5=.... 6=.... 7=....
8=.... 9=.... A=.... B=.... C=.... D=.... E=.... F=....
G=.... H=.... I=.... J=.... K=.... L=.... M=.... N=....
O=.... P=.... Q=.... R=.... S=.... T=.... U=.... V=....
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME T:TAKE M:MONI V:VTR E:LEVEL
Setting the destination
for Block 4.
Setting the destination
for Block 3.
Setting the destination
for Block 2.
Setting the destination
for Block 1.
