3-15
BKS-R3219A/R1617A I&SSM
R : SET ROUTE
Purpose
A function to display the expanded source name, when 2
switchers are combined to expand the input.
Source name that is actually selected will be displayed by
following the source connected to the route destination
when the route setting is performed.
There also is a function to automatically switch the cross-
point in the route destination side when the switching
including the expanded destination is requested.
Up to 64 cross-points can be set with the route function.
In the following example, by using the route function to
expand the IN005 of Switcher2 to IN001 to IN004 of
Switcher1, and to output the input signals from IN001 to
IN004 to OUT017 of Switcher2, it can secure the commu-
nication route from remote control in one action, and
display the expanded source name (IN001 to IN004) to the
cross-point status of OUT017.
At this time, the level of Switcher 1 and that of Switcher 2
must be the same.
(Please refer to “5-1. Route Function” for more detailed
information about the route function.)
IN001
IN002
IN003
IN004
OUT001
IN005
IN006
IN007
IN008
OUT017
Switcher 1
Switcher 2
SONY ROUTING SYSTEM SETUP MENU
BKS-R6010 V1.00
STATION NUMBER 2
SET ROUTE (ROUTE DESTINATION:DESTINATION<SOURCE-LEVEL)
PAGE=1
ROUTE | DEST | SOURCE | LEVEL1-8 | ROUTE | DEST | SOURCE | LEVEL1-8
OUT001 OUT017 IN005 - 10000000 | ...... : ....... < ........ - 00000000
...... ...... ....... - 00000000 | ...... : ....... < ........ - 00000000
...... ...... ...... - 00000000 | ...... : ....... < ........ - 00000000
Example of Terminal Menu Setting
Example of Communication Route Wiring
Lv1
Switcher 1
Switcher 2
Lv1
OUT001
OUT017
IN005
Setting procedure
1.
Select secondary station menu item “R”.
2.
Select the item with cursor key.
The relationship between the connection status of the
signal and setting items are as following:
Example of Route Function Setting
Route/Dest/Source Items Common Setting:
1.
Press
[Enter]
to switch to name input mode. Press
[Enter]
again before entering data to cancel registra-
tion.
2.
Enter the “Type
+
No.” name or description name.
1) When [J : NAME STYLE (Type
+
Num)] is
selected in the primary station menu, input the
type name (between 0 and F) and the number for
the source and destination name.
2) Each time
[Ctrl]
_
[N]
is pressed when [J :
NAME STYLE (DESCRIP. NAME)] is selected
in the primary station menu, the following input
mode will be switched alternately.
When “Ctrl
_
N : Type
+
Num” is displayed on the
screen, it means that the name mode will be
changed to “Type
+
Number” by pressing
[Ctrl]
_
[N]
.
Description name input mode :
Input Description name from the first to seventh
characters using the alphabet and numerical keys.
“Type
+
Number” name input mode:
Input in the same way as 1).
