3-6
BKS-R3219A/R1617A I&SSM
System Status Screen
The system status screen appears when the main power of
the primary station is turned on.
When
[Ctrl]
_
[X]
are pressed, the menu screen appears.
When
[Ctrl]
_
[X]
or
[Ctrl]
_
[B]
are pressed on the
menu screen, the display returns to the system status
screen.
n
When password is set, a message appears prompting you to
enter password when
[Ctrl]
_
[X]
are pressed to enter the
menu screen. Enter the correct password.
On the system status screen, result of the self-diagnostics
that is performed at the power-on is displayed. The status
messages are displayed while the system is operating.
Refer to “Section 4. Confirmation of Function”.
System status screen when the main power is turned on
(IXS-6600/IXS-6700, HKSP-R80, HDS-X5800)
Primary station menu screen (Example of IXS-6600/IXS-6700)
Menu Screen
The menu screen appears when
[Ctrl]
_
[X]
are pressed on
the system status screen. (Primary station menu screen)
All of the menu items that are used for system setup are
displayed on the primary station menu screen.
When a menu item is selected by any of the following
methods, the display changes to the setting screen.
.
Select the desired menu item with the cursor key and
press
[Enter]
. (There are some terminal emulators that
cannot execute this method.)
.
Press the alphabet keys that are assigned to the respec-
tive menu items.
Perform the respective settings that are shown on the
primary station menu screen.
When
[Ctrl]
_
[X]
or
[Ctrl]
_
[B]
are pressed on the
primary station menu screen, the display returns to the
system status screen.
SONY INTEGRATED ROUTING SYSTEM IXS-6700 V1.0
ITEM
ROM CHECK SUM A43F
RAM READ AND WRITE OK
REFERENCE SIGNAL OK
S-BUS LINK TERMINATE
REAL TIME CLOCK OK
STARTED
Ctrl-X to SYSTEM SETUP MENU
2001.06.23-20.16 S-BUS LINK DISCONNECTED TO CHANNEL A
2001.06.23-20.16 S-BUS LINK DISCONNECTED TO CHANNEL B1
2001.06.23-20.16 S-BUS LINK DISCONNECTED TO CHANNEL B2
SONY ROUTING SYSTEM SETUP MENU IXS-6700 V1.00 STATION NUMBER 1
MODIFICATION COMMAND
A: SET CONTROL AREA B: SET SOURCE/DEST TYPE
C: SET DESTINATION NAME D: SET SOURCE NAME
E: SET LEVEL TABLE F: SET ACTIVE UNIT NUMBER
G: UPDATE BACKUP CONTROLLER H: SET GLOBAL PHANTOM
I: SET INDEX NUMBER J: NAME STYLE(Type + Num )
L: SET PHYSICAL ASSIGNMENT M: SET INHIBIT TABLE
N: SET DESCRIPTION NAME GROUP O: SET TIE LINES
Q: CHANGE CROSSPOINT R: CALL SECONDARY STATION
S: SET SOURCE ASSIGNMENT
MAINTENANCE COMMAND
P: CHANGE PASSWORD T: SET CLOCK
U: DISPLAY ETHERNET STATION W: SYSTEM STATUS LOG
X: DISPLAY S-BUS COMMUNICATION Z: SET UNIT DETECTABLE
Ctrl-X/B:QUIT SETUP MENU
