3-2
BKS-R3219A/R1617A I&SSM
Add BKS-R3219A/R1617A to the system
Setting of secondary station at BKS-R3219A/R1617A
See Section 3-4 for description of setup method.
Copy the setting from another panel.
L: COPY TABLE DATA FROM
Change
setting
Set the level to control.
Set the parent unit setting and child unit setting when multiple control units
are to be used.
Set the terminal selection method, and setting related to operation of this
equipment.
Z: SET PANEL STATUS
Set the settings related to display mode of the panel of this equipment.
Y: SET DISPLAY MODE
H: SET PHANTOM TABLE
Set the phantom if the phantom is to be used.
Set the assignment of the source/destination selection button of this equipment.
N: SET PANEL TABLE
Set the route if the route display is to be used.
R: SET ROUTE
Set the “available source (source that can be selected from this equipment)”
if you need to limit the selection of input.
O: SET AVAILABLE SOURCE / DESTINATION
Restart the primary station equipments.
Refer to the Installation Manual that comes with the equipment assigned to the primary
station.
Get the backup of system setting data.
End
