Sony BKS-R1617A Installation And Setup Manual Download | Manualshive

Page: 7 / 66

background image

3

BKS-R3219A/R1617A I&SSM

Manual Structure

Purpose of this manual

This manual is the installation and system setup manual of following models.

32 Button Remote Panel

BKS-R3219A

16 Button LED Remote Panel BKS-R1617A

This manual is intended for use by trained system and service engineers, and
describes the information on setting the BKS-R3219A/R1617A.

Related manuals

The following manuals are prepared for this unit.

.....

Operation Guide (Supplied with the unit)

This manual describes the cautions on the operation of this unit and the setting of
station numbers.

.....

Operation Manual (Available on request)

This manual describes the detailed information on how to operate this unit.
The operation manual is stored as a PDF file in the CD-ROM supplied with the
IXS-6600-C/IXS-6700-C.
If this manual is required, please contact your local Sony Sales Office/Service
Center.

.....

Maintenance Manual (Available on request)

This manual describes the information that premises the parts level service
(parts replacement, parts list, diagrams, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.

.....

Protocol Manual (Available on request)

This manual describes the protocol for controlling this unit.
If this manual is required, please contact your local Sony Sales Office/Service
Center.

SONY ROUTING SWITCHER SYSTEM
REMOTE1 (S-BUS/ROT16) PROTOCOL and COMMAND SPECIFICATIONS
Part No.: 9-977-477-xx

SONY ROUTING SWITCHER SYSTEM
REMOTE2 (Cart++) PROTOCOL and COMMAND SPECIFICATIONS
Part No.: 9-967-261-2x

Trademarks

Trademarks and registered trademarks used in this manual are follows.

.

Ethernet is a registered trademark of Xerox Corporation.

.

Windows and MS-DOS are registered trademarks of Microsoft Corporation.

.

IBM and AT are registered trademarks of International Business Machine Corporation.

«
...
5
6
7
8
9
...
»

Summary of Contents for BKS-R1617A



































































Reviews:

No comments

Related manuals for BKS-R1617A

Brand: S&C Pages: 40

Brand: S&C Pages: 34

VLT AQUA Drive FC 202

Brand: Danfoss Pages: 124

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 8

Brand: Danfoss Pages: 114

Brand: Danfoss Pages: 16

Brand: Danfoss Pages: 24

Brand: Danfoss Pages: 8

ECL Comfort 296

Brand: Danfoss Pages: 159

VLT AutomationDrive FC 301

Brand: Danfoss Pages: 78

Brand: Danfoss Pages: 20

ECL Comfort 210

Brand: Danfoss Pages: 12

ECL Comfort 110

Brand: Danfoss Pages: 8

Brand: Danfoss Pages: 16

Brand: Danfoss Pages: 64

Brand: Samson Pages: 52

Brand: Rachio Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands