6-14
FVS-1000 MMP1
6-4-6. SV-186 Commands
Command
Action or response
from PC
Ver
Display version and basic status.
Also reply any errors is there are any.
Adjust
Test mode and memorize posison of glass
(see table 4 and read section 6-4-3. item 3)
Gain vp
To adjust vertical glass move gain
(See section 6-4-3. item 3)
Gain vd
To adjust vertical glass move gain
(See section 6-4-3. item 3)
Gain hp
To adjust horizontal glass move gain
(See section 6-4-3. item 3)
Gain hd
To adjust horizontal glass move gain
(See section 6-4-3. item 3)
Gain tv
To adjust vertical picture stability
(See section 6-4-3. item 4)
Gain th
To adjust horizontal picture stability
(See section 6-4-3. item 4)
Target set
To put data of gain tv and gain th.
Aging
OPS aging mode (See section 6-4-3. item 3)
Rev comp
For adjust picture move cause when Rev and
Fwd.
6-4-5. SV-186 LED, TP and DIP Switches
meanings.
Table below are LED, TP and dip switches meanings.
LED reference
Meaning
D508/SV-186
Invert each time pass mainroutine
D504/SV-186
On when in timer int interrupt
D507/SV-186
On when in delay1 int interrupt
D503/SV-186
On when in delay2 int interrupt
D506/SV-186
D502/SV-186
D505/SV-186
On when OPS stop any reason (able to
check by ver command)
D501/SV-186
TP reference
Meaning
TP502/SV-186
TP503/SV-186
H: film move
L: film stop
TP507/SV-186
TP508/SV-186
TP512/SV-186
H: delay2 int interrupt
TP513/SV-186
H: delay1 int interrupt
TP514/SV-186
H: timer int interrupt
TP515/SV-186
S502/SV-186
Open
Close
1 to 7
Not used
Not used
8
Any interrupt disable
Normal inerrupt
6-4. OPS Assembly Adjustment