manualshive.com logo in svg

Sony BKFV-100/1, Maintenance Manual

Share
Download
Sony BKFV-100/1 Maintenance Manual Download Page 141

3-11

FVS-1000 MMP1

HMF

(1) Remove the two screws, and remove the filter retainer.

(IR/UV cut filter.)

(2) Remove the four screws, and remove the lens holder

and lamp cover (front).

(3) Blow off the dusts on the HMF using the air blower

for optical use.

(4) For stubborn dusts which cannot be removed using the

air blower, clean with a cleaning cloth moistened with

cleaning liquid for optical use.

n

After cleaning, install the lamp house assembly after

the cleaning liquid has evaporated completely.

Lens and IR/UV Cut Filter

(1) Blow off the dusts on the lens and IR/UV cut filter

using the air blower for optical use.

(2) For stubborn dusts which cannot be removed using the

air blower, clean with a cleaning cloth moistened with

cleaning liquid for optical use.

n

After cleaning, install the lamp house assembly after

the cleaning liquid has evaporated completely.

Lens holder

Cleaning

IR/UV cut filter

3-3. Cleaning the Optical System

PSW3 

x

 6

PSW3 

x

 6

PSW3 

x

 6

Lamp cover (front)

Lens holder

Filter retainer
(IR/UV cut filter)

HMF

Summary of Contents for BKFV-100/1



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands