Sonnen sonnenBatterie 10 Installation Instructions Manual Download Page 87

Page: 87 / 100

Uninstallation and disposal | 14

KD-557 | 1000241 | EN | 02

87 / 100

14 Uninstallation and disposal

14.1 Uninstallation

DANGER

Improper uninstallation of the storage system

Danger to life due to electrocution!

The storage system must only be uninstalled by licensed electricians.

DANGER

Improper uninstallation of the sonnenProtect

Danger to life due to electrocution!

The sonnenProtect must only be uninstalled by authorised electricians.

14.2 Disposal

CAUTION

Improper transport of battery modules

Fire outbreak at battery modules or emission of toxic substances!

Only transport battery modules in packaging that meets applicable regula-
tions.

Never transport damaged battery modules.

CAUTION

Improper disposal of battery modules

Explosion or fire outbreak at battery modules or emission of toxic substances!

Do not dispose of batteries in fire.

The storage system, the batteries it contains and the sonnenProtect

must not

be disposed

of as domestic waste!

Summary of Contents for sonnenBatterie 10





































































































Search results

Summary of Contents for sonnenBatterie 10

Reviews:

Sonnen sonnenBatterie 10, Installation Instructions Manual, Page: 87 / 100

Search results

Summary of Contents for sonnenBatterie 10

Reviews: