
5 | Installing the storage system
22 / 100
Installation instructions sonnenBatterie 10
5 Installing the storage system
• sonnen recommends installing the storage system with the accompanying feet so that
while it is secured to the wall, part of the load is still supported by the feet.
• The storage system can be installed without feet. The storage system must be installed
10 cm from the floor
, as otherwise the cover cannot be mounted and secured correctly.
Level
Total height of storage system
Lowest
172 cm
Middle
178 cm
Highest
184 cm
Without feet (10 cm from floor)
171 cm
Table 3: Height of the storage system depends on whether feet are used
5.1 Selecting the installation location
NOTICE
Insufficient load-bearing capacity of wall for mounting
Damage to storage system and surrounding area!
The wall selected for the installation of a storage system must be able to sup-
port a total weight of 850 kg.
Ensure that the mounting material and the wall have the required load-bear-
ing capacity.
Use all of the mounting points on the mounting frame of the storage sys-
tem.
5.1.1 Observing minimum distances
Observe the specified minimum distances to neighbouring objects, walls and ceilings.
If you install the storage system without feet, maintain a minimum distance of 10 cm
from the floor.
Summary of Contents for sonnenBatterie 10
Page 97: ......
Page 98: ......
Page 99: ......
Page 100: ...sonnen GmbH Am Riedbach 1 D 87499 Wildpoldsried ...