Sonnen sonnenBatterie 10, Installation Instructions Manual, Page: 14 / 100

3 | Storage and transport
14 / 100 Installation instructions sonnenBatterie 10
„
Create a detailed defect report if necessary. Send this within the reporting time frame
(seven days for freight forwarders; 24 hours for parcel couriers) to the shipping com-
pany and sonnen GmbH.
Damage claims cannot be settled if the above mentioned documentation is not
submitted within the stated reporting time frames.
3.2.4 Transport to the installation location
WARNING
Risk of injury due to heavy weight of components
Crushing or straining due to incorrect lifting or dropping of components of the
storage system!
„
Wear safety shoes when transporting and setting up the system.
„
Use a manual or electric sack truck to move components.
„
Ensure components are stable.
3.2.5 Acclimating the power module before installation
NOTICE
Forming of condensation
Damage to the storage system!
„
Check the inside of the storage system for condensation before installation.
„
Only install the storage system if there is no condensation on the surfaces.
If the temperature of the packed power module upon delivery is significantly lower than
the ambient temperature at the place of installation, condensation may form on the sur-
faces of the electronic components.
„
If the power module was transported at a temperature below 0 °C:
1. Unpack the power module at a location with suitable ambient conditions (see Technical
data [P. 89]).
2. Let the power module sit until it can be ensured that there is no more condensation on
the surfaces. Depending on ambient conditions, this may take up to 24 hours.
3. Only then can the power module be installed and commissioned.