manualshive.com logo in svg

Sonnen sonnenBatterie 10, Installation Instructions Manual, Page: 26 / 100

Share
Download
Sonnen sonnenBatterie 10 Installation Instructions Manual Download Page 26

5 | Installing the storage system

26 / 100

Installation instructions sonnenBatterie 10

„

Loosen the screws in the slotted holes. The screws are already not fully tightened when
delivered. The contact discs must not be removed.

„

Push the mounting frame into the desired position. Use a spirit level to ensure that the
mounting frame is straight and level.

„

Tighten the screws with a torque of 

6 Nm

.

5.2.7 Sealing the openings

The specified degree of protection for the storage system and therefore touch
protection and protection against the ingress of water and foreign bodies is
only achieved when all openings on the storage system are sealed as described
in the product documentation.

• The openings on the mounting frame must be sealed in order for the specified degree of

protection for the storage system to be achieved.

Summary of Contents for sonnenBatterie 10





































































































Reviews:

No comments