Solartron Mobrey 3595 4C, User Manual

Page: 96 / 128

IMP Commands 3595 4C User Manual Part Two
1-44
35952350 (CH01/AA)
OS
( O utput S tatus)
OS
Note: This command applies only to IMP type 1D.
Function: This command returns the status of the analogue channels.
Response: Stream 3, 12 characters:
3 0 d
1
e d
2
e d
3
e d
4
e
Where:
digits d
1
d
2
d
3
d
4
relate to channels 1, 2, 3 and 4; they are either ‘V’ or ‘I’, depending on
whether the last command sent to that channel was CH n VO x or CH n CI x .
e represents the output status code as shown in Table 1.19.
For example, ’30 V0V0 I 0 I 0’ shows that channels 1 and 2 have been correctly set for ‘voltage
output’ and channels 3 and 4 have been correctly set for ‘current output’
Table 1.19: Analogue Output status codes
e Code Meaning
0 OK (channel is correctly set)
1 Calibration mode ‘on’ but calibration data corrupt. (* and **)
2 Value requested is out of range. (**)
* EEPROM not fitted or IMP not yet calibrated.
** The last channel output command sent to that channel was not executed.