Solartron Mobrey 3595 4C, User Manual

Page: 82 / 128

IMP Commands 3595 4C User Manual Part Two
1-30
35952350 (CH01/AA)
KA
(calibration off)
KA n
Note: This command does not apply to the digital IMP (types 2A and 2B).
Function: With calibration ‘on’, measurements are corrected with the offset and scale factors kept in
EEPROM. These factors are determined during factory calibration, or changed by the calibrate
command (CA, CH CV or CH CI), and suit the individual IMP. This function defaults to ‘on’.
With calibration ‘off’, the correction factors used assume perfect components. This provides
the user with a reference or a means to operate with a missing, corrupted, or non-
programmed non-volatile memory.
Response: None.
See also: CA, CH CV and CH CI
UN
(UNits of temperature)
UN n
Note: This command does not apply to IMP types 1D, 2A and 2B.
Function: Decides the units of temperature used for:
1.
Temperature measurement results (thermocouple and RTD).
2.
Setting the external reference temperature with the TR command.
The IMP default is
°
C (on power-up).
Response: None.